Local contractor in 22032

A non-functional garage outlet required attention, prompting us to investigate the cause of the power loss. We identified the issue, performed the necessary repairs, and replaced the receptacle as needed. After completing the work, we tested the outlet to ensure it was operating safely and properly, ready for use again.

The existing electrical panel required an upgrade for enhanced capacity and safety. We replaced the main load center with a new Square D 200-Amp panel, ensuring compliance with the National Electrical Code and local standards. The process included careful disconnection of circuits, secure installation, grounding upgrades, and whole-home surge protection. Electrical service was momentarily interrupted during this comprehensive upgrade to ensure optimal functionality.

An outlet had stopped working, prompting our electrician to assess the issue. After a thorough evaluation, we identified the problem and repaired it on-site. If any additional work is needed, it will be discussed and the diagnostic fee is credited towards the repair costs.

In a room that lacked existing ceiling power, we enhanced comfort and air circulation by installing a new ceiling fan. We carefully ran new wiring and expertly mounted the fan, ensuring it operated flawlessly. This installation not only elevates the room's functionality but also contributes significantly to a more enjoyable living environment.

The existing electrical meter base was outdated and presented compliance issues. We successfully removed the non-compliant meter base, installed a new enclosure, and ensured all electrical connections met regulatory standards. After thorough testing and inspection, Dominion Energy restored service with a secure utility seal, ensuring system safety and reliability.

An outdated fixture was removed to make way for the new, customer-supplied fixture. We took care of all necessary connection hardware, ensuring everything was properly tested before concluding the project. Additionally, non-used low-voltage coax cable was extracted from the home, leaving the space clear and tidy.

An outdated, broken, electrical box was the main concern during this installation. We removed the existing box and installed a new device support box, ensuring all wiring connections were properly made. After securely mounting the customer-supplied light fixture, we conducted thorough testing to ensure everything operated safely and efficiently.

Flickering kitchen lights and a GFCI receptacle that wouldn't reset raised concerns that we promptly addressed. We evaluated the older dimmers and identified problematic light bulbs, advising replacement. The malfunctioning GFCI receptacle was replaced, restoring functionality. Additionally, we discovered severe issues in the main electrical panel, including water infiltration and a deteriorating service cable entrance, informing the homeowner of necessary actions.

A GFCI outlet in the master bathroom was not receiving power, and we discovered a dead short stemming from loose wiring in the attic. After careful inspection, we found the wiring was improperly secured, making contact with metal piping. We secured the wiring, resolved the short, and restored functionality to all lights and outlets.

The existing attic fan was malfunctioning, affecting ventilation. We replaced the old unit with a new attic fan and thermostat kit, ensuring it was properly connected to the existing power source. The thermostat was set to 115° for optimal performance, with adjustments available upon request. The attic is now functioning efficiently.

The previous light fixture was outdated and in need of replacement. We removed it and installed a new motion-sensing light fixture, rewiring it to connect with an indoor switch that we relocated near the power outlet under the window. Once installed, we ensured that everything was functioning properly.

A circuit breaker was repeatedly tripping, indicating a potential short in the upstairs circuit supplying power to various areas. After diagnosing the issue, a short wire was found in the closet light fixture, which had extended into the attic. Upon isolating it, the system was reset, restoring functionality. Further advice from a roofing contractor will be sought to address the attic wiring.

The outside air-conditioning thermostat cable had shorted out, prompting diagnostics from an HVAC company. We ran new wiring from the indoor AC unit to the outdoor unit, correctly addressing the issue with the concrete slab. Following the HVAC company’s instructions, we ensured the installation was ready for their termination visit.

The electrical box had tripped, causing several lights to stop working despite previous assessments suggesting it was functioning properly. We re-evaluated the electrical box, identifying the underlying issue before restoring power to the affected lights and ensuring everything was safely operational.

In a home without existing ceiling power, we expertly ran new wiring to facilitate the installation of a ceiling fan. After securing the fan in place, we ensured its proper operation, enhancing comfort and air circulation throughout the room. This installation not only improved the home’s ventilation but also increased its overall value.

A partial power outage affected several rooms, leaving them in darkness. We promptly assessed the situation, pinpointed the overloaded circuit breaker, and upgraded the system to restore power effectively, significantly improving safety throughout the residence.

After evaluating the outdated floodlight at the side of the home, we removed the existing unit and installed a new smart floodlight camera in the same location. Once the installation was complete, we conducted thorough testing to ensure proper functionality. Any drywall issues resultant from the process are the responsibility of a drywall professional for patching and painting. Payment will be collected at the completion of the project.

A broken double pole switch in the basement laundry room was diagnosed and addressed efficiently. After removing the faulty switch, a new double pole switch was installed, ensuring the existing wiring was functioning properly. Everything is now operating as it should, providing reliable power to the area.

Installed a new homeowner-supplied pull-chain ceiling fan in a room without existing ceiling power, including running new wiring to safely support and power the fan. We also maintained the functionality of the switched outlet so the room kept its original convenience while gaining improved comfort and airflow.

We addressed a need for a new light fixture installation that required replacing the existing electrical box. This involved installing a secure device support box, making the necessary wiring connections, and properly mounting the new fixture. After the installation, we conducted thorough testing to ensure everything functioned safely and effectively.

An outdated floodlight was hindering the security of the home. We efficiently removed the existing floodlight and installed a modern smart camera in its place, ensuring optimal performance by testing functionality post-installation. Any necessary drywall repairs from the installation will require a professional. The project ensures enhanced safety and light management for the homeowner.

Installing a pull-chain ceiling fan in a room lacking existing ceiling power required us to run new wiring and securely mount the fan for optimal performance. All outlets remain fully functional, while any necessary drywall repairs can be handled by a professional contractor afterward. The work ensures improved air circulation and comfort in the space.

An outlet had completely stopped working, creating significant inconvenience. We quickly diagnosed the faulty connection and completed the necessary minor repair, restoring functionality and alleviating the customer’s worries. The flickering lights raised concerns about the home's electrical stability. We identified the wiring issue and carried out a swift minor repair to ensure a more reliable system. A burning smell prompted urgent action. We carefully investigated and discovered an overheated wire, which we replaced during our visit, eliminating any hazards and ensuring the family’s safety. Frequent breaker trips indicated an underlying issue. We conducted a thorough diagnosis and replaced the malfunctioning breaker, allowing the electrical system to run smoothly once again for the homeowner. Partial power loss affected multiple areas of the home. After diagnosing the issue, we repaired a damaged circuit promptly, restoring full functionality to all outlets and fixtures affected.

We assessed the existing ceiling fan and its support, removing it to install a new light fixture supplied by the homeowner. The fan was then relocated to a different area of the home, ensuring proper functionality in its new position. Any modifications were handled to ensure everything was code compliant and operational.

An outlet had ceased functioning, prompting us to investigate the underlying issue. We discovered a faulty connection and completed the necessary repairs, restoring the outlet to full working order. A frequently tripping breaker was causing a hassle in the home. To address this, we undertook a thorough troubleshooting process, identifying an overloaded circuit as the culprit. We made adjustments to ensure the breaker functioned safely and effectively. Flickering lights indicated a more serious electrical issue. Our examination revealed loose terminals in the wiring, which we promptly tightened and secured, effectively eliminating the flickering and providing stable illumination throughout the space. The alarming smell of burning prompted an immediate assessment of the electrical system. We identified an overheating wire, replaced the damaged section, and secured all connections, successfully removing the hazard and restoring normal operations. Partial power loss across several devices indicated a problem with the distribution panel. We conducted an in-depth investigation and addressed the issue, restoring reliable power to the affected areas in the home.

To enhance the lighting in the basement living room, we installed six flush-mounted 6" LED recessed lights, ensuring a balanced lighting layout. New wiring was routed from the existing switch location, and we installed a LED-rated dimmer switch. Additionally, we rewired the receptacles controlled by the switch to function as standard always-on outlets. Patchwork for any drywall modifications will be handled afterward by a professional.