Local contractor in 22015

A malfunctioning kitchen ceiling fan was removed, and we installed a new unit at the same location after ensuring the wiring was in good working order. Additionally, we updated an outlet near the living room fireplace with a new 120 V outlet, aligning it with the other outlets in the room. All fixtures are fully functional now.

A flickering light prompted an in-depth diagnosis, revealing an underlying wiring issue. We quickly identified the problem and completed minor repairs to restore stable lighting, ensuring optimal functionality and safety in the affected area.

We addressed an issue with a clicking outlet in the master bathroom and evaluated the living room outlets. After isolating the circuit and finding no signs of malfunction, we replaced two receptacles in the living room and upgraded two outlets in the upstairs bathroom, ensuring GFI protection. All outlets are now functioning properly.

A smart hardwired doorbell installation was required to enhance home security. We successfully positioned a new doorbell at the front entry and hardwired it using a new low-voltage transformer. We relocated existing electrical switches, verified power functionality, and connected the doorbell to the Wi-Fi network, ensuring seamless operation and full functionality.

A flickering light was causing concern in the home, indicating a potential electrical issue. We diagnosed the problem, addressing the underlying cause and completing minor repairs to restore consistent lighting functionality.

We removed the existing fixture and installed a new exterior light provided by the customer, ensuring secure mounting and proper wiring connections. After completing the installation, we tested the fixture to guarantee reliable operation, providing peace of mind for the homeowner.

Smart doorbell issues required attention, specifically troubleshooting the indoor chime and low-voltage transformer. We replaced the low-voltage transformer with a new 30 amp unit, ensuring power at both the indoor chime and the door location. While the smart device is not yet registering, we are monitoring its performance closely. Any necessary drywall repairs post-install will be managed by a professional.

To enhance safety and efficiency, we replaced the existing main load center with a new Square D 40-Space, 80-Circuit, 200-Amp panel. This included adhering to NEC and Fairfax County standards, ensuring all branch circuits were properly connected and tested, and installing surge protection for improved reliability. Upgrading grounding and bonding also secured compliance with local codes.

A malfunctioning GFCI outlet in the garage presented a safety concern due to improper installation. We identified a significant fire hazard linked to incorrect wire terminations and removed the outlet. After installing new 20 amp-rated wiring and junction boxes, we verified that the outlet was functioning properly. Any necessary drywall repairs will need to be addressed by a professional.

An old ceiling fan needed replacement, so we safely powered down the circuit and ensured the support bracket was secure to the ceiling joists. We modified the existing wiring, installed a new switch with fan control, and mounted the new fan. After repowering, we verified smooth fan operation and control functionality.

The existing back deck outlet was non-functional, with no power detected. We rewired the outlet from the dining room circuit, installed new wiring, and added a GFCI receptacle to ensure compliance with current codes. After completing the installation, we conducted thorough testing to verify that the outlet is now functioning properly.

The existing ceiling fan was outdated and needed replacement for improved comfort and aesthetics. We expertly mounted the new customer-supplied ceiling fan, ensuring secure installation and proper wiring for optimal performance. Additionally, non-functioning outside light fixtures by the front door were evaluated, and after confirming the support box and wiring were sound, we installed new light fixtures at the same location and tested them for proper functionality.

We evaluated the homeowner's concerns regarding potentially hazardous light switches in the upstairs master bathroom, which had been malfunctioning with signs of burning and smoke. We removed the switches, assessed the wiring, re-terminated it, and installed new switches, restoring functionality to the light fixtures. We also evaluated the main electrical panel, tightening the loose grounding connection to ensure proper safety standards.

Upon evaluation during the scheduled meter base replacement, it became clear that a full replacement was unnecessary. We worked closely with Dominion Energy to address and resolve the utility-related issue, making essential repairs to securely reattach the existing meter base to the home and ensuring the electrical service was operating safely. The pricing was adjusted to reflect the reduced scope of work.

A flickering light led us to investigate the electrical system. After thorough troubleshooting, we diagnosed the issue as a faulty connection. We completed minor repairs to restore full functionality, ensuring the lights operate smoothly once again.

An outlet that had stopped working prompted us to investigate the electrical issue. We conducted thorough troubleshooting, identified the underlying problem, and completed minor repairs to restore functionality. Our swift action ensured that the household's electrical needs were addressed effectively.

To enhance security and convenience for the homeowner, we installed a motion detector for an existing light fixture. This integration allows for automatic lighting that improves energy efficiency and provides responsive, hands-free illumination. Following the installation, we thoroughly tested the system to ensure everything is functioning properly.

An outdated main electrical panel can lead to safety hazards and inefficiencies. We upgraded the existing panel to a Square D 200-Amp system, ensuring compliance with NEC standards. The project included removing the old panel, installing a surge protection device, enhancing grounding systems, and securely reconnecting all circuits. This upgrade significantly improved the home's electrical reliability and safety.

The existing GFCI outlet on the back deck needed replacement as it was no longer protecting the circuit. We removed the old outlet, inspected the support box and wiring, and installed a new 120V GFCI receptacle with a weatherproof cover. The installation was sealed and tested to ensure it operates correctly. Any drywall damage caused will require professional patching and painting.

The existing sconces and lamp post were malfunctioning, prompting us to replace them with new fixtures as chosen by the homeowner. We removed the old units at the front door and driveway, then installed the new gaunt light fixture and lamp post, ensuring everything functioned perfectly post-installation.

A malfunctioning pool chain light fixture in the basement laundry room prompted us to install a new, rewired fixture, now easily controlled by a light switch for optimal illumination. Additionally, we improved the upstairs bedroom ceiling fan by removing the old band switch and installing a new wireless fan light switch, ensuring seamless operation and proper wiring.

We addressed the malfunctioning Sunco recessed light fixtures in the basement, which posed safety risks. All original fixtures were removed, and we installed 14 new 4" flush-mounted LED recessed lights, ensuring balanced illumination and updated wiring. Additionally, a new LED-rated dimmer switch was installed for optimal light control, while we assessed and replaced non-code approved wiring as needed.

The upstairs master bedroom was in need of a ceiling fan installation, but it lacked power, a support box, and a ceiling. We wrapped and connected the new fan to the existing switch while rewiring the original outlet to serve as a standard outlet. After the installation, we tested the setup to ensure everything operated correctly.

We addressed a problem with flickering lights caused by a faulty switch. Our skilled electricians efficiently repaired the switch, ensuring optimal functionality. Additionally, we replaced outdated outlets to enhance safety and electrical performance. Comprehensive and reliable solutions were provided to restore peace of mind.

To enhance comfort and air circulation in the primary bedroom, we replaced two pre-existing light fixtures with new customer-supplied ceiling fans. We ensured safe and secure mounting while properly wiring them to guarantee reliable operation and improved aesthetics in the space.

Ceiling fans not functioning properly can cause discomfort in any home. We assessed the existing support boxes before installing three new ceiling fans in distinct locations. Following the installation, we conducted a comprehensive test to ensure all fans operated correctly. Any necessary drywall work resulting from the installation will need to be handled by a professional drywall contractor.

An outdated electrical panel posed a safety concern, so we replaced it with a new Square D 40-Space, 80-Circuit, 200-Amp panel. We also installed a dedicated 50-amp circuit for an EV charger, ensuring compliance with all local codes. Additionally, we connected a Dryer Buddy device to the laundry circuit and set up a NEMA 14–50 R receptacle in the garage for convenient EV charging.

To improve air circulation and enhance the room's aesthetics, we removed the old ceiling fixture and installed a new customer-supplied ceiling fan onto the existing electrical box. We ensured a safe, secure mounting and performed proper wiring to guarantee reliable operation and comfort for years to come.

Multiple outlets and lights throughout the home were not functioning, indicating a serious electrical issue. After diagnosing the problem, we discovered that the circuit breaker in the main electrical panel had failed and needed replacement. Following the installation of a new breaker, all electrical systems are now operating properly, including the three-way light switch in the upstairs hallway bathroom and the living room outlet.

A power outage affected multiple areas and outlets in the back of the home. Upon investigation, we discovered that an upstairs bedroom outlet had deteriorated, causing the outage. We replaced the faulty outlet and restored functionality throughout the affected areas. Any resulting drywall repairs will need to be handled by a professional. Payment will be requested upon project completion.